Core products: high-precision aluminum tubes, wear-resistant mandrels, high-strength seamless aluminum tubes, aluminum sheets and coils in various specifications, anti-corrosion corrugated aluminum sheets, industrial-grade aluminum rods, and customized aluminum profiles.
Welcome to the official website of Tianjin Tianxin Metal Materials Co., Ltd.!
Maintenance and Care of Aluminum Panels
Release Date:
2023-03-29
Author:
Special care should be taken to select an appropriate detergent. The fundamental principle is: only neutral detergents must be used. Never use strongly alkaline detergents such as potassium hydroxide, sodium hydroxide, or sodium carbonate, nor strong acidic detergents, abrasive detergents, or detergents that can dissolve coatings.
The specific cleaning steps for aluminum plates are as follows:
1. First, rinse the surface of the plate with plenty of clean water;
2. Use a soft cloth dampened with diluted detergent to gently wipe the surface of the test board;
3. Then rinse the board with plenty of clean water to wash away the dirt;
4. Inspect the board surface; there must be no unclean areas, and any should be cleaned with detergent;
5. Rinse the cutting board with clean water until all detergent is completely removed.
Note: Do not clean hot circuit boards (temperature above 40°C), because moisture evaporation can damage the circuit board’s coating!
Pay special attention to selecting a suitable detergent. The basic principle is: a neutral detergent must be used! Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide, or sodium carbonate, nor strong acidic detergents, abrasive detergents, or detergents that can dissolve coatings.
Previous post
Next article
News Comments
Please provide your contact information and requirements, and we will arrange for a specialist to get in touch with you!
Latest Updates
Let us introduce you to what aluminum tubing is.
Aluminum tubing typically refers to pipes made from aluminum alloys. Aluminum alloys are materials composed of aluminum combined with other metallic elements, characterized by their light weight, high strength, and excellent corrosion resistance, making them widely used across various industries.
Aluminum tubes are mainly classified into the following types.
Classified by precision: ordinary aluminum tubes and precision aluminum tubes; the latter typically undergo secondary processes such as cold drawing and rolling after extrusion.
With the rapid growth of the new‑energy vehicle industry, automotive thermal management systems are confronting entirely new challenges and opportunities. In this field, aluminum tubing, thanks to its superior performance and broad range of applications, has steadily emerged as an unsung leader in thermal management for new‑energy vehicles, providing robust support for enhanced vehicle performance and safe operation.
Production and Manufacturing of Aluminum Tubes
Aluminum tubes are classified into four main types based on their forming process: hot-extruded aluminum tubes (the mainstream), cold-drawn and precision-rolled aluminum tubes, welded aluminum tubes, and impact-extruded pharmaceutical aluminum tubes. Among these, the most widely used in the industry is seamless or split‑die extruded aluminum tubing.
What is the difference between 409 stainless steel and 430 stainless steel?
Compared with ordinary low‑carbon steel, 409 stainless steel sheet exhibits poorer thermal conductivity and lower elongation; consequently, greater deformation forces are required during shearing and bending. For 321 stainless steel sheet, springback during bending is more pronounced than in carbon steel. Moreover, since the elongation of stainless steel sheet is lower than that of carbon steel, the bend radius R of the workpiece should be larger than that for carbon steel during bending operations; otherwise, cracking is likely to occur.
What is the difference between 202 stainless steel and 304 stainless steel?
202 stainless steel and 304 stainless steel are both austenitic stainless steels at their core, non-magnetic, and visually quite similar. However, the key difference lies in their nickel content, which results in significant variations in their mechanical properties and price.
Factory Address: Liaocheng City, Shandong Province, China
Get a quote
By entering your email address, you agree to receive marketing communications from Tianxin Metal Materials, and you may unsubscribe at any time.
All content
Close